Epson AcuLaser C9100 Guia de preparacion Pagina 251

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 438
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 250
251
c
Caution:
Leave adequate room around the printer to allow for sufficient
ventilation.
Avoid locations that are subject to direct sunlight, excessive
heat, moisture, or dust.
Avoid using outlets that other appliances are plugged into.
Use a grounded outlet that matches the printer’s power plug.
Do not use an adapter plug.
Only use an outlet that meets the power requirements for this
printer.
Checking color registration
After replacing the photoconductor unit or setting up your printer
at the new location, you need to check the color registration and
adjust the color alignment if necessary.
1. Set A4 or Letter size paper on the MP tray or in the standard
paper cassette.
2. Make sure the LCD panel shows Ready or Sleep, then press
the Enter button to access the control panel menus.
3. Press the Enter button again, then press the Down
button several times to display Color Regist Sheet.
Vista de pagina 250
1 2 ... 246 247 248 249 250 251 252 253 254 255 256 ... 437 438

Comentarios a estos manuales

Sin comentarios