Epson Stylus Color 3000 Guía de usuario descargar pdf (Pagina 122)

Troubleshooting

6-14

If you have problems with paper feeding, paper jams, or ejected

paper, check here for solutions.

Paper doesn’t feed correctly from the paper tray.

Paper doesn’t feed correctly from the manual feeder.

Try this Then do this

Remove the stack of paper

from the paper tray.

Check that the paper:

◗ Isn’t curled or creased.

◗ Isn’t too thick or thin (see Appendix B).

◗ Isn’t too old (see Chapter 3 or your paper packaging).

◗ Isn’t overloaded in the feeder (see Chapter 3 for guidelines).

◗ Isn’t jammed inside the printer. (If the Paper Out light is

flashing, paper is jammed. See page 6-16.)

Then reload the paper as described in Chapter 3, making sure that:

◗ The paper-release lever is set back to the single sheet position.

◗ The edge guides fit the paper’s width snugly, without any

slack.

◗ The rear edge guide fits the paper’s length.

◗ The paper tray and paper tray cover are fully extended if you

are printing on oversized paper.

◗ No continuous paper is in the paper path. (Press Load/Eject to

park it out of the way.)

Try this Then do this

Remove the paper from the

manual feeder.