Epson Stylus Color 3000 Guía de usuario Pagina 68

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 152
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 67
Printing on Special Media
3-20
2. Lift the printer hood and tear off the printed pages at the
perforation by pulling it across the tear-off edge.
If the paper’s perforation was not at the printer’s tear-off
edge, adjust the tear-off position as described on page 3-22.
Do not perform step 3.
3. Press the
Load/Eject button to feed the rest of the
continuous paper backward to the paper-park position so
it’s ready for printing the next time you need it.
If the ink smears on your document, you can set the thickness
lever to the + position and reprint; see page 3-13.
If your margins are not where you want them, adjust them in
your application software. However, if you need to adjust your
paper’s loading position, you can change it using the
Micro
Adjust buttons. See the next section for instructions.
Using the Micro Adjust Buttons
The Micro Adjust U and Micro Adjust D buttons on your
printer’s control panel allow you to make quick adjustments to
your paper’s loading and tear-off positions.
Caution:
Never press Load/Eject
when you have
continuous label paper
loaded in the printer.
This would feed labels
backward, causing
them to peel off inside
the printer.
Loire-PLUS.BK.book Page 20 Friday, May 2, 2003 2:56 PM
Vista de pagina 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 151 152

Comentarios a estos manuales

Sin comentarios