
Printing on Special Media
3-23
2. To switch to single sheet printing, move the paper-release
lever backward to the single sheet position.
To switch to continuous paper printing, move the
paper-release lever forward to the continuous paper
position.
3. Now follow the instructions in Chapters 1 or 2 to select the
correct
Paper Source, Paper Size, and other settings in
your printer software. Then send a print job. The printer
loads the type of paper you selected when it receives the
print job.
Printing a Banner or Other Roll
Paper Project
You can use EPSON roll paper to print a banner up to 44 inches
long.
First follow the instructions below to load the paper. (You can
also print a banner on continuous computer paper. See
page 3-15 for paper loading instructions.) Then see the
appropriate printing instructions for your software—Windows
or Macintosh—in the sections that follow.
For best results and a more professional looking banner, the
optional banner paper cutter (C815052) is recommended.
Contact your dealer, call
EPSON Accessories at
(800) 873-7766, or visit www.epsonstore.com (U.S. sales only).
In Canada, please call (800) 463-7766 for dealer referral.
Note:
If the Pause and Paper
Out
S lights flash, you
may have changed the
paper-release lever
position when paper was
still loaded. Set the lever
back to its original
position and press the
Load/Eject button to
eject or park the paper.
Then set the lever to its
new position.
Loire-PLUS.BK.book Page 23 Friday, May 2, 2003 2:56 PM
Comentarios a estos manuales