Epson Stylus Color 3000 Guía de usuario Pagina 93

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 152
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 92
Managing Print Jobs and Network Printing
4-11
Connecting to the Printer on
Windows NT 4.0
If you installed an optional network interface card in your
printer and installed the printer software as described in the
Quick Setup booklet, follow the steps below to connect the
remote printer to each system on the network using the TCP/IP
(or LPR) protocol.
1. Follow the instructions to configure the interface card in
the manual that came with the card.
2. To connect the printer to a TCP/IP (or LPR) port, open
the Control Panel and select
Printers.
3. Right-click the
EPSON Stylus COLOR 3000 icon, then
select
Properties.
4. Select the Ports tab and click the
Add Port button.
5. Select
LPR Port in the Port list. Then click New Port.
6. Type the IP address of the card in the first box and type a
short name for the printer in the second box. Then click
OK.
7. Click
Close.
8. You see the address and name of the printer in the Port list.
Click
OK to exit printer properties.
Now you can print to the remote printer. Repeat these steps for
each system on the network that needs to access the printer.
Note:
If you connected the
printer directly to a
Windows NT server or
you’re using a different
network protocol, see
your Windows NT
documentation for
instructions on
configuring your printer
for the network. If you’re
using an optional
interface card, also see
the documentation that
came with the card.
Loire-PLUS.BK.book Page 11 Friday, May 2, 2003 2:56 PM
Vista de pagina 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 151 152

Comentarios a estos manuales

Sin comentarios