Epson ActionPC 2000 Guía de usuario descargar pdf (Pagina 38)

Note

The 3.5-inch drive installed in your computer is drive A. If

you install another diskette drive, it is drive B. You can

change the drive assignments through SETUP.

To insert a diskette into a 5.25-inch drive, hold the diskette with

the label facing up and the read/ write slot leading into the

drive. Slide the diskette into the drive and then turn down the

latch to secure it.

When you want to remove the diskette, make sure the drive

light is off; then press the release button or turn the latch.

Remove the diskette and store it properly.

Caution

Never remove a diskette or reset or turn off the computer

while a diskette drive light is on. You could lose data. Also,

remove all diskettes before you turn off the computer.

Stopping a Command or Program

You may sometimes need to stop a command or program while

it is running. If you have entered an MS-DOS

or application

program command that you want to stop, try one of the

following:

Press Pause

Hold down Ctrl and press C

Hold down Ctrl and press Break.

Using Your Computer 2-3

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 128 129

Sin comentarios

Epson ActionPC 2000 Guía de usuario Pagina 38