Epson ActionPC 2000 Guía de usuario Pagina 71

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 129
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 70
2.
Locate the hard disk drive connector on the system board.
3.
Position the system board connector end of the cable so that
the red wire aligns with pin 1 of the connector on the
system board. There is a “1” printed on the system board to
identify pin 1.
hard disk
drive
connector
4.
Make sure the holes in the connector fit over the pins; then
push in the cable connector.
could severely damage your system board when you push
4-10
Installing and Removing Drives
Vista de pagina 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 128 129

Comentarios a estos manuales

Sin comentarios