Epson ActionPC 2000 Guía de usuario descargar pdf (Pagina 52)

Push the SIMM into the socket until it is seated firmly in the

slot. Then tilt it upright, as shown above, guiding the hole

at each end of the SIMM over the retaining post at each end

of the SIMM socket. If it does not go in smoothly, do not

force it; pull it all the way out and try again.

Repeat steps 4 and 5 for each additional SIMM.

Replace any option cards you removed. (See page 3-13 for

instructions.)

Removing SIMMs

If you need to remove SIMMs from your computer (to install

different ones, for example), follow the steps below:

Remove any option cards that may be blocking your access

to the SIMM sockets. (See page 3-16 for instructions.)

Installing and Removing Options

3-11

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 128 129

Sin comentarios

Epson ActionPC 2000 Guía de usuario Pagina 52