Epson Stylus Color II Ink Jet Printer Guía para resolver problemas Pagina 4

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 12
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 3
Control Panel
The printer’s control panel contains lights for displaying the
printer status and buttons for controlling certain functions, as
described in this section.
Lights
Power
On when the printer is on.
Data
Flashes when data is being received by the printer. On when
data remains in printer memory or when printing a self test
or demonstration page.
Ink Out
O
Flashes when the black ink cartridge is low on ink. On when
the black ink cartridge is empty or not installed. The printer
will not work if the black ink cartridge is empty or not
installed.
Ink Out
NNN
Flashes when the color ink cartridge is low on ink. On when
the color ink cartridge is empty or not installed. The printer
will not work if the color ink cartridge is not installed.
If color ink runs out while you’re printing, the printer stops.
You can continue to print with the black ink cartridge by
switching to monochrome printing. To do this, turn off the
printer, turn it on again, and resend your print job.
Paper Out
On when the printer runs out of paper. Flashes rapidly if
there is a paper jam.
Economy
On when economy printing mode is selected. In economy
mode the printer uses less ink by printing fewer dots per
character. Use this mode for rough drafts of text only.
Condensed
On when condensed mode is selected. In this mode, the
printer prints selected fonts at 60% of their width so that
more characters can fit on a page.
Pause
On when printing is paused and flashes when you clean the
print heads or replace ink cartridges. The
Pause
light also
flashes when an error occurs. Never turn off the printer
when the
Pause
light is flashing.
Print Mode
See
Print Mode
in the next section.
Buttons
In addition to the button functions explained below, you can
perform additional functions using certain button
combinations and poweron sequences, as described in the
next section.
Alt
Used in combination with other buttons to reset the printer,
clean the print heads, or replace the ink cartridges; see the
next section for more information.
Pause
(or
Reset
)
Stops printing temporarily. Press it again to resume.
Economy/Condensed
(or
Cleaning
O
)
Selects economy or condensed mode as indicated by the
Economy
and
Condensed
lights. Use this button only if
you print from a DOS application.
Print Mode
(or
Cleaning
NNN
)
Selects the paper and ink type when using DOS. The current
setting is indicated by the left and right
Print Mode
lights,
described in the following table.
Paper type Left light Right light
Plain paper (true black) Off Off
Plain paper (composite black) Off On
Coated or glossy paper On Off
Transparency film On On
For most printing on plain paper, select Plain paper (true
black). If the black ink on the printout is blurred, select Plain
paper (composite black). Composite black is produced by
mixing cyan, magenta, and yellow ink.
Load/Eject
Loads or ejects a sheet of paper. The printer normally loads
and ejects paper automatically.
Button combinations and poweron functions
The button combinations below perform additional functions
to control your printer.
Alt
+
Pause
(or
Reset
)
Clears the printer’s buffer and resets the printer settings to
their factory defaults; see “Default Settings” for more
information.
Alt
+
Economy/Condensed
(or
Cleaning
O
)
Cleans the black print head; see “Cleaning the Print Heads”
for more information.
Alt
+
Print Mode
(or
Cleaning
NNN
)
Cleans the color print head; see “Cleaning the Print Heads”
for more information.
Load/Eject
+
POWER
switch
Checks the paper length and performs a printer self test; see
“Testing the Printer” for more information.
EPSON Stylus COLOR II
EPSON Stylus COLOR II-4 8/1/95 Ink Jet Printers
Vista de pagina 3
1 2 3 4 5 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios