Epson Stylus Color II Ink Jet Printer Guía para resolver problemas descargar pdf (Pagina 8)

Calibrating with a PC

1. If you did not install the Bi-D Calibration Utility on your

hard disk, insert the Windows printer driver diskette in

your computer’s diskette drive.

2. Make sure Windows Program Manager is running.

3. To open the Bi-D Calibration Utility, choose

Run

from the

File menu. The Run dialog box appears.

4. In the Command Line box, type the disk and directory for

the utility (

A:CALIBRAT

C:\

directory

\CALIBRAT

if on

your hard disk). Then press

Enter

5. When you see the Calibration Utility screen, make sure

Stylus COLOR II

is selected as the printer. If it isn’t, use

↑ or ↓ to select it.

Also make sure

Print calibration pattern

is selected at the

bottom of the screen. (Use the

Tab

key to move down, if

necessary.)

6. Press

Enter

to start calibrating.

7. The next screen prompts you to align the black and color

heads. Press

Enter

to choose

Yes

. (To align only the black

print head, press

Tab

to select

Wait for 1 minute while the printer prints a page of multiple

patterns of vertical lines, each of which is assigned an

offset value. In most patterns, the vertical lines are slightly

misaligned. Look for the pattern that is most closely

aligned.

| |

Aligned Not aligned

8. Enter the offset value of the pattern that is most closely

aligned. The printer prints another sheet in black only to

verify that the alignment is correct.

9. If the vertical lines are aligned, press

Enter

to select

Done

If the lines are not aligned, press

Tab

to move to

Re-Calibrate

; then press

Enter

to repeat the calibration.

Calibrating with a Macintosh

1. Open the StylusCOLOR II folder and double-click

Bi-D Calibration Utility

2. You see a prompt asking you to choose the interface type.

Click

Serial

3. You see the Bi-D Calibration Utility screen. First specify

whether you connected the printer to the modem or

printer port by clicking the appropriate icon.

4. Click the

Pattern 1

button to align the print heads using

the first pattern page.

Wait for about two minutes while the printer prints a page

containing multiple patterns of vertical lines, each

assigned with an offset value. In most patterns, the

vertical lines are slightly misaligned. Look for the pattern

that is most closely aligned.

| |

Aligned Not Aligned

5. Enter the offset value of the pattern that is most closely

aligned in the

No.

box and click

. The printer prints a

confirmation page.

6. Repeat steps 4 and 5, selecting the

Pattern 2

through

Pattern 5

buttons and entering the offset value of the

pattern that is most closely aligned on each pattern page.

7. When you finish, click

Quit

Loading Special Paper

To ensure the best results, EPSON provides special papers

and transparencies that are formulated for the inks used in

EPSON ink jet printers.

To order EPSON papers and transparencies, contact your

dealer or call EPSON Accessories at (800) 873-7766 (U.S.

only). In Canada, call (800) BUY-EPSON for sales locations.

Use the following part numbers when ordering:

Paper or other media Size Part number

Special coated paper for

720 dpi

Letter (8.5

11 inches)

Legal (8.5

14 inches)

S041062

S041067

Special coated paper for

360 dpi

Letter (8.5

11 inches) S041060

High-quality glossy paper Letter (8.5

11 inches) S041072

Transparency film Letter (8.5

11 inches) S041064

Setting the Paper Thickness and Adjustment Levers

Before you start printing, you should check the paper

thickness and adjustment levers to make sure they are set

correctly for the type of paper or other media you are

Caution:

Before you change the lever settings, make sure there is no

paper in the paper path and that printing is paused. To do this,

press the

Pause

button or turn off the printer.

EPSON Stylus COLOR II

EPSON Stylus COLOR II-8 8/1/95 Ink Jet Printers

1 2 3 4 5 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios

Epson Stylus Color II Ink Jet Printer Guía para resolver problemas Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Epson Stylus Color II Ink Jet Printer