
EPSON EPL-N1600 Chapter 1 Product Description
Rev. A 33
1.4.4 Special Functions
Built-in special fucntion can be selected by turnin
on the printer while
holdin
down the specific combination of button(s). The table below
explains each operation
Note that to activate the operation you must continue to hold the buttons
down until the LCD indicates that "RAM check" is completed
Table 1-16. .Special Function
*1:For details, refer to Chapter 4 "Disassembl
and Reassembl
"
CAUTION
All special functions (with the exception of hex dumps)
are intended for service technicians only and are not
documented in the user manual. Please handle these
operations with due care.
Mode/Operation Buttons Result
Hex-Dump Mode Form Feed Once this mode is activated, the printer
prints a hex dump of all received codes
and data. To cancel this mode,
ou must
switch the printer off.
Initialize EEPROM*1 • Online
• Continue
•Menu
Clears all EEPROM content, then writes
factor
settin
s into EEPROM. (Also
initializes total pa
e count.)
Initialize panel
settin
s*1
Continue Resets all panel settin
s (common
environment settin
s and interface-
specific settin
s) to their factor
defaults.
Clear total pa
e count*1 • Online
•Menu
• Item
Clears the total pa
e count to 0.
Force-erase the flash-
ROM module*1
•ALT
• Item
• Value
•Enter
Deletes content of flash ROM module in
slot A.
Update pro
ram ROM*1 • Online
•ALT
• Value
Updates content of ROM-DIMM in
pro
ram sockets.
Cop
ROM module*1 • Online
•ALT
•Enter
Copies content of ROM module in slot B
into ROM module in slot A.
Toner Counter Reset • Online
• Form Feed
Reset the toner counter value to "Full"
status.
Maintenance Mode *1 • Online
• Form Feed
• Continue
The maintenance menu item is added to
the settin
menu.
Comentarios a estos manuales